|
|
|
Please feel free to browse our range of facade protection products, including many anti-mould solutions, anti-bacterial coatings, graffiti removers and a whole lot more.
You can view our range below, or alternatively if you are looking for a specific solution then you can choose from the categories listed -
- Mould and Condensation Control - An excellent range of premium quality antimould, antifungal and condensation control coatings that offer a complete decorative and treatment system in one go. These mould and condensation control systems are easy to use and provide long-lasting protection on walls and ceilings in domestic, rented and social housing, as well as commercial and industrial buildings.
- Antibacterial Coatings - Antibacterial interior coatings designed for application to either walls, ceilings or floors to prevent the growth of pathogenic bacteria. Ideal for hospitals, food processing businesses, schools, kitchens or any situations where a high degree of cleanliness is essential.
- Antigraffit Paint Removers - Permanent, non-sacrificial graffiti removal system, which allows the repeated, easy removal of graffiti. Coatings are clear, water vapour permeable and do not alter the aesthetic appearance of the protected surface.
- Masonry Consolidation - A single-pack consolidating, bonding and strengthening kit for a wide range of masonry including brick, stone and terracotta. Reduces dusting and the loss of friable material to help in the retention of architectural features and limit the deterioration of both structural and historically significant facades.
- Masonry Water Repellents - A choice of highly effective, ready-to-use masonry water repellents to protect buildings from penetrating damp and rainwater, reducing the subsequent incidence of frost damage, spalling, salt efflorescence and organic growth.
- Surface Binder - For the application to interior masonry to stabilizes chalky, dusty and friable surfaces. Forms a bound surface, which retains its permeable properties. Suitable for damp and alkaline substrates allowing the treatment of limestone and lime pointing.
- Organic Growth - A range of surface biocides based on Disodium octaborate and benzalkonium chloride to inhibit and eradicate organic growth such as lichens, mosses and algae on a wide range of building materials and surfaces
- Fall Protection - A range of high visibility fall protection solutions such as anti-slip step edges, decking cleats, step covers, tapes, sheeting and anti-slip paints to prevent slips, trips and falls across manufacturing industries, healthcare and building maintenance
Alternatively you can view a selection of our products below
|
-
Mould & Condensation Control
- ACS ANTIMOULD EMULSION
(Brilliant White/Magnolia) HSE No: 6308.
A superior quality, low odour antimould emulsion for walls, with a 5 year
warranty. Suitable as a Primer/Undercoat with ACS Acrylic Products (P)
Usage Rate: 10 -12m2/litre
Packaging: 2.5 litres and 5.0 litres
|
|
- ACS ANTIMOULD EMULSION
(Standard Colours) HSE No: 6308
Usage Rate: 10 -12m2/litre
Packaging: 2.5 litres and 5.0 litres
- ACS ANTIMOULD KIT
A convenient kit containing 2.5 litres ACS Antimould Emulsion,
250ml ACS Mould Wash Concentrate and a sponge
Usage Rate: 10 -12m2/litre
Packaging: KIT
|
|
- ACS ANTIMOULD MICROPOROUS REPLASTERING PAINT
HSE No: 6355
A mould inhibiting “breathable” matt emulsion for use on damp and
replastered walls in new build and refurbishments (after dpc and tanking)
Usage Rate: 10 -12m2/litre
Packaging: 5.0 litres
- ACS ANTICONDENSATION COATING (White)
A special coating to inhibit condensation on ceilings and specialised
applications, contains a biocide for the sole purpose of protecting the
paint in the can and the applied film.
Usage Rate: 3 - 5m2/litre
Packaging: 2.5 litres and 5.0 litres
- ACS SCRUB OUT MOULD GROWTH HSE No. 7550
|
A ready to use blend of surfactants and biocides in a handy bottle brush to provide both mechanical and preservative cleaning of surfaces
Usage Rate: up to 5m2 /l
Packaging: 0.25 litre
|
|
- ACS MOULD WASH CONCENTRATE HSE No. 7676
A concentrated biocidal cleaner for use to clean areas contaminated with mould growth prior to the application of ACS products. 1 x 0.25 litres concentrate makes 5 litres ready for use.
Usage Rate: 6 - 8m2/litre
Packaging: 0.25 litre
- ACS MOULD CONTROL PACK
A pack containing 2 x 50ml Mould Eradication Additive and 1 x 250ml ACS
Mould Wash Concentrate. The Mould Eradication Additive can be used in most
types of paints to provide a biocide for the sole purpose of protecting the applied paint film.
Usage: variable
Packaging: Pack
- ACS ACRYLIC EGGSHELL (P)
Low odour, quick drying, tough washable and steam resistant coating
containing a biocide for the sole purpose of protecting the paint in the
can and the applied film.
Usage Rate: up to 10m2/litre
Packaging: 2.5 litres and 5.0 litres
-
Hygiene & Anti-Bacterial Coatings
- ACS BIOSAN AQUA GLOSS
Single pack, medium duty water based acrylic anti-bacterial gloss coating for walls and ceilings in hospitals, care homes, catering and food processing areas. Available only in white
Usage Rate: 10 - 12 m2/litre
Packaging: 5 litres
- ACS BIOSAN AQUA MATT
Single pack, medium duty water based acrylic anti-bacterial matt coating for walls and ceilings in hospitals, care homes, catering and food processing areas
Available in white and a full range of BS and RAL colours
Usage Rate: 10 - 12 m2/litre
Packaging: 5 litres
- ACS BIOSAN AQUA SATIN
Single pack, medium duty water based acrylic anti-bacterial satin coating for walls and ceilings in hospitals, care homes, catering and food processing areas
Available in white and a full range of BS and RAL colour
Usage Rate: 10 - 12 m2/litre
Packaging: 5 litres
- ACS BIOSAN AQUA PLUS
Twin pack, heavy duty water dilutable antibacterial epoxy coating with a semi gloss finish hospitals, catering and food processing areas
Available in white and a selected range of BS and RAL colours
Usage Rate: 7m2/litre
Packaging: 5 litres
- ACS BIOSAN AQUA ULTRA
Twin pack, heavy duty water dilutable antibacterial epoxy coating with a semi gloss finish for floors in hospitals, catering and food processing areas
Available in Light Grey (BS00AO5), Dark Grey(BS 18B25), Blue (BS 18E53), Red and Green
Usage Rate: 5 - 7m2/litre
Packaging: 5 litres
- ACS BIOSAN SEALANT
A solvent free, bactericidal elastic jointing paste based on
acrylic dispersions. Ideal for sealing, jointing, filling, fixing and glueing on concrete, wood, metal and many more substrates.
Usage Rate: Gap 10mm wide x 15mm deep and 6 metres long/cartridge
Packaging: 310cc cartridge
-
Anti-Graffiti Coatings & Paint Removers
- ACS GRAFFITI SHIELD
One pack, non-sacrificial permanent anti -graffiti coating system, allowing for repeated easy removal of any graffiti. Available in matt and gloss.
Usage Rate: 8 - 10 m2/litre
Packaging: 5 litres
- ACS NON-DARKENING SEALER
Diluted with equal parts water to reduce porosity on certain substrates
before the application of ACS Graffiti Shield
Usage Rate: 8 - 10 m2/litre
Packaging: 5 litres
- ACS PAINT REMOVER 320
Water based,brush applied, biodegradeable broad spectrum paint remover to deal with most graffiti on porous substrates such as timber, brick and stone
Usage Rate: 1m2/litre
Packaging: 4 litres
- ACS PAINT REMOVER 400
Water based, spray applied graffiti and paint remover for impervious surfaces such as painted or Perspex. Does not affect the underlying surface such as the main paint coat or cause perspex to frost.
Usage Rate: 1m2/litre
Packaging: 473ml trigger spray
-
Masonry Consolidation
-
Masonry Water Repellents
- ACS MASONRY WATER REPELLENT (290)
A special alkali resistant grade water repellent for new work, repointing
applications and used with Wacker OH100.
Usage Rate: 0.5 - 2m2/litre
Packaging: 5 litres and 25 litres
- ACS UNIVERSAL WB WATER REPELLENT (for masonry/wood)
A specially formulated water based, ready to use water repellent system
for use on most surfaces. No organic solvent. Interior and exterior use.
Usage Rate: 2 - 6 m2/litre
Packaging: 5 litres and 25 litres
- ACS MASONRY WATER REPELLENT CONCENTRATE
Water dilutable silicone microemulsion concentrate with excellent depth penetration as a water repellent. Effective on damp surfaces and alkaline resistant. Dilute 1 part concentrate to 14 parts water
Usage Rate: 2 - 6 m2/litre
Packaging: 1.0 litre and 2.5 litres
-
Surface Binder
- ACS SURFACE BINDER
Water dilutable concentrate, solvent free surface binder for new and previously unexposed interior brickwork and masonry. Treated surfaces remain fully water vapour permeable. Dilute 1 part concentrate to 9 parts water
Usage Rates: 4 m2/litre
Packaging: 1.0 litre, 2.5 litre and 5 litres
-
Organic Growth
- CHANNELWOOD BORACOL 10RH
A boron, quaternary ammonium and water based masonry irrigation
surface biocide to remove algae, moss and lichens for most surfaces.
Ready for use. Professional use. HSE No: 4911
Usage Rate: 4 - 6 m2/litre
Packaging: 5 litres and 25 litres
- CHANNELWOOD BORACOL 8.5RH
A boron, quaternary ammonium and water based masonry irrigation
surface biocide to remove algal, moss and lichens for most surfaces.
Ready for use. Amateur use. HSE No: 4809
Usage Rate - 4 - 6 m2/litre
Packaging - 2.5 litres, 5 litres and 25 litres
-
Fall Protection
- Anti-Slip Step Covers
Versatile, heavy duty preformed GRP step covers providing a slip-resistant surface for damaged, worn or slippery steps.Black with 55mm nosing in yellow, white and now stone colour.
Sizes (mm)
600 x up to 345 with 55 nosing
750 x up to 345 with 55 nosing
800 x up to 345 with 55 nosing
1000 x up to 345 with 55 nosing
1200 x up to 345 with 55 nosing
1500 x up to 345 with 55 nosing
2000 x up to 345 with 55 nosing
3000 x up to 345 with 55 nosing
- Anti-Slip Landing Covers
Versatile, heavy duty preformed GRP Landing Covers, providing a slip-resistant surface to the landing or as a covering for loading bays, wide steps or similar areas. Black with 55mm nosing in yellow or white
Sizes (mm)
800 x up to 1200 with 55 nosing
1000 x up to 1200 with 55 nosing
1200 x up to 1200 with 55 nosing
2400 x up to 1200 with 55 nosing
- Anti-Slip Step Edge
Heavy duty, high visibility, slip-resistant GRP step nosing. Screw fix to step edges in conjunction with the Adhesive Mastic. Can be cut to size using a hacksaw. Available in 70mm wide with a 30mm vertical nosing or 55mm wide with a 55mm nosing. Available in yellow or white in coarse (external) or medium (internal) grades.
Sizes (mm)
1000 x 70 x 30
1000 x 55 x 55
1500 x 70 x 30
1500 x 55 x 55
2000 x 70 x 30
2000 x 55 x 55
3000 x 70 x 30
3000 x 55 x 55
- Anti-Slip Sheeting
Versatile, heavy duty preformed GRP Sheets providing a slip-resistant surface for ramps, walkways, bridges, machine shop floors and other susceptible areas.
Available in black, stone or yellow.
Sizes (mm)
1200 x up to 1200
2400 x up to 1200
- Adhesive Mastic
Gap filling adhesive used to glue appropriate Anti-Slip Products to dry surface
Adhesive Mastic (skeleton) Gun
310cc cartridge and Skeleton Gun
|
|
