|
|
Protection against bacteria on walls, ceilings and floors
|
The ACS Biosan® range of products gives excellent protection against potentially pathogenic bacteria:-
- effective against E.Coli 0157, Salmonella sp., Staphylococcus aureus, Listeria monocytogenes,Shigellasp sp. and most other bacteria.
- ideal solution for the maintenance of a hygienic environment where cleanliness and the control of potentially pathogenic bacteria is of fundamental importance.
- for use in hospitals, operating theatres, wards, dental surgeries, care homes, food processing areas, restaurants, kitchens, dairies, breweries, abattoirs, leisure centres and schools.
- suitable for use in food preparation areas to comply with the requirements of the Food Hygiene Regulations 2005 and EC 852/2004
- Class 0 surface spread of flame (BS476: Part 6&7)
|
| |
Speak to Dr Bill Beauford now for free help with your specification and costing on - Tel 01935 414012 or E-Mail: bbeauford@acslimited.co.uk
The ACS Biosan® products are available as coatings and a sealant.
ACS Biosan® Aqua
- Single pack, water based acrylic coatings for walls and ceilings in matt, satin and high gloss
- Excellent flow and levelling
- High opacity
- Easy to apply
- Easy to clean
- High gloss in White
- Matt and Satin available in a wide range of colours
- Typical coverage for gloss, matt and satin: 9 - 12m2/litre/coat
- Available in 5 litres
|
| |
ACS Biosan® Aqua Plus
Two pack, solvent free hygiene coating. Used on walls and ceilings
where a high abrasion resistance and heavier duty coating is required.
- Semi gloss
- Chemical resistant
- High abrasion resistance
- Low odour
- Excellent opacity
- Easy to apply
- Easy to clean
- Available in a wide range of colours
- Typical coverage: 7m2/litre/coat
- Available in 5 litres
ACS Biosan® Aqua Ultra
Two pack, heavy duty, solvent free hygiene floor coating where high abrasion resistance is needed.
- Chemical resistant
- High abrasion resistance
- Low odour
- Excellent opacity
- Easy to apply
- Easy to clean
- Available in five standard colours (Light Grey BS 00A05, Dark Grey BS 18B25, Blue BS 18E53, Red and Dark Green)
- Typical coverage: 5 - 7m2/litre/coat
- Available in 5 litres
ACS Biosan® Sealant
Solvent free, elastic, hygiene acrylic jointing paste. Ideal for
sealing, jointing. Filling, fixing, gluing on concrete, wood metal,
hard PVC, tiles and plaster.
1. High elasticity (> 900%)
2. Alkali resistant
3. Very resistant to ageing
4. Waterproof
5. Very good adhesion on most substrates
6. Easy application
7. Available in 310cc cartridges
Back to Facade Protection
|
|
|
